Visit Legrand.com
Soundbar TV Mount designed for Sonos Beam™ (Gen 1,2)
WSSBM1
- Fits TVs 93.98cm - 177.80cm
- Speaker Stand Height 19"
$79.99 USD
WSSBM1 is rated
out of
5 by
9.
Videos to Get You Started
SANUS WSSBM1 Features Video
Soundbar TV Mount designed for Sonos Beam™ (Gen 1,2)
Seamlessly integrate Sonos Beam with your mounted TV with the Soundbar Mount for Beam. The 12” of height adjustment ensures an ideal fit between Beam and the bottom of your mounted TV for a clean, streamlined look, and the intuitive Smart Latch™ allows for speaker height adjustment with just the lift of a finger – no tools required.
Compatible with SANUS TV mounts and other mount brands, the Soundbar Mount for Beam works with a large range of TV sizes and features broad VESA compatibility. When used with a full-motion TV mount, the soundbar mount allows Beam to move with the TV for an optimal listening experience.
Developed in partnership with Sonos, the SANUS mount for Beam is custom-fit to Beam ensuring optimal speaker performance and unobstructed access to speaker ports. Installation is a brief, 15-minute process that requires only a screwdriver, and all necessary hardware is included in the box.
Product Features
The Details
| Product Brand: | SANUS |
|---|---|
| Model Code: | WSSBM1 |
| UPC Code: | 793795532398 - Black - $79.99 USD |
| Product Width: | 26.38" / 67.01cm |
| Product Height: | 19.37" / 49.20cm |
| Product Depth: | 4.60" / 11.68cm |
| TV Size Range: | 37" - 70" / 93.98cm - 177.80cm |
|---|---|
| Maximum TV Weight: | 7lbs / 3.18kg |
Recommended Products for You
Rated 5 out of
5
by
SonosGuy from
Fits my TV!
Low rating because it doesn’t fit all TVs but it fit on my TCL just fine. I like how it comes with a lot of hardware. I now have a clean look and no cords to look at!
Date published: 2022-09-24
Rated 2 out of
5
by
wardcw from
Also had conflict with TV power cord
I attempted to add the SANUS WSSBM1 to my mounted Sony KDL-55W900A, but also ran into an issue with the WSSBM1 cross beam covering the TV power cord. I added additional mount spacers from my SANUS TV mount to clear the power cord, but found this caused the TV to stick out too far from the wall. I decided instead to remove the WSSBM1 mounting bracket completely.
This was a very disappointing outcome from what appeared to be an otherwise decent solution.
Date published: 2020-06-14
Rated 1 out of
5
by
RW12 from
Isn’t compatible with certain TV’s
Mount isn’t compatible with 55”LG. Extension arm covers power outlet. Sonos needs to make a more flexible product and provide tv compatibility. Make sure it will fit your tv before you buy.
Date published: 2020-05-09
Rated 4 out of
5
by
MikeInWashington from
Great idea but won't work with my 65" LG TV
The LG TV has a bulge at the bottom of the display. This mount only works on TVs that have a completely flat back. I wish they specified models that wouldn't work with this product. Seems like good quality so if you have a flat-back TV this would probably be a great product for you. Would get 5 stars if it actually fit my TV. :-|
Date published: 2020-04-26
Rated 1 out of
5
by
Dan555 from
Doesn’t work with large tv
This mount doesn’t work with my Samsung tv. It’s 82” and the bar is not long enough to extend to the bottom. I had to return the mount.
Date published: 2020-03-15
Rated 3 out of
5
by
LokenVV from
Nice mount but doesn't fit my TV
This mount is not compatible with my TV. I have a 65" Philips 65PFL55044/F7 TV and I went ahead and attached the mount to my TV but the arm of the mount doesn't extend below the bottom of the TV. The mounting holes on the back of my TV are about halfway up the TV so it's too high to be able to attach the Sonos Beam to the mount because I have the mount fully extended and it doesn't extend far enough. I guess I'll have to return this... I was really looking forward to the clean look this was going to provide.
Date published: 2020-01-24
Rated 2 out of
5
by
Anonymous from
Extra Parts Needed
Bought this for my Beam and 40” Samsung. In order for this mount to work with Samsung 40” flat screen you must buy extra spacers and 60mm M8 screws (not easy to find).
The way the mount will cover the power input for the tv. There are two options around this. One is to cut about 8” off the mount to expose the power port. Two is to buy additional 1/2” spacers and M8x60mm bolts. The spacers I was able to use some left over from an old tv mount. Bolts I had to order from Home Depot for about $10.
The mount is great once installed.
I deducted one star for the design flaw, Samsung’s are one of the most popular TVs around. I check five different model 40” Samsung’s that I have at home and at my businesses and all would have been impacted by this design flaw. A TV of this size would be one of the most appropriate for a Beam. Not sure why they made the mount for 55” or larger TVs.
Another star for not including the extra mounting hardware.
A third star for having the nerve to advertise a 15 minute install time. Will likely take a person longer than that just to take their tv off the wall and remove the already installed wall mount.
All and all I am happy with the finished product. Had I known what a hassle it would have been to figure out the solution, secure the additional parts and the time I invested in this seemingly easy project, I would have just bought the Sonos branded mount that attaches to the wall.
Date published: 2019-08-29
Rated 1 out of
5
by
Durdoooo from
Doesn’t give you the right lengthen screws
The screws that come with this set doesn’t fit normal TVs when you try to use their spacers or even without it
Date published: 2019-05-16
SANUS is the #1 best-selling TV mount brand in the U.S.*
Questions? Contact Us
Monday - Friday 8am - 7pm CST
Saturday - Sunday 10:30am - 7pm CST
*NPD annual dollar sales period ending 12/31/20