Super Slim Fixed-Position Wall Mount for 32" – 80" flat-panel TVs

  • Type Fixed-Position
  • Fits TVs 32" - 80"
  • Max Weight 150lbs
  • Depth 0.67"


Hover over the large image to zoom

Super Slim Fixed-Position Wall Mount for 32" – 80" flat-panel TVs

  • Type Fixed-Position
  • Fits TVs 32" - 80"
  • Max Weight 150lbs
  • Depth 0.67"


BLL2 is rated 2.4 out of 5 by 11.
  • y_2019, m_10, d_15, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_bll2, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_sanus
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 20.11ms

The BLL2 Super Slim fixed-position wall mount is designed to emphasize the sleek look of ultra-thin LCD, plasma and LED TVs by placing them just .67" / 1.7 cm from the wall. The BLL2 features exclusive ClickStand™ technology, which holds the bottom of the TV away from the wall for easy cable access without removing the TV from the mount. Convenient quick-release tabs on the mounting brackets stay hidden, but easily pull down to unlock the TV from the wall plate for cable access. The BLL2 also allows lateral shift adjustment, allowing the TV to slide left and right on the wall plate so it’s positioned exactly where you want it, even with off-center wall studs. Wall plate mounting holes are designed to accommodate 16" or 24" studs. Universal mounting pattern fits virtually any 32" – 80" flat-panel TV up to 150 lbs.

Will this work with my TV?

Enter the model number of your TV to find out.

Here are a few products that are compatible with your TV!

    Ready to install your Mount?

    Use the HeightFinder for mounting instructions. Go to HeightFinder

    Product Features

    Take A Look At These Specs

    Product Brand: SANUS
    Model Code: BLL2
    UPC Code: - Black
    Product Width: 30.53" / 77.55cm
    Product Height: 17.49" / 44.42cm
    Product Depth: 0.67" / 1.70cm
    TV Size Range: 32" - 80" / 81.28cm - 203.20cm
    Maximum TV Weight: 150lbs / 68.04kg
    Universal Mounting: Yes | 50 x 25 through 725 x 400
    Supported VESA Patterns

    Supported VESA Patterns

    • VESA 75 x 75
    • VESA 100 x 100
    • VESA 100 x 150
    • VESA 100 x 200
    • VESA 200 x 100
    • VESA 200 x 200
    • VESA 200 x 300
    • VESA 200 x 400
    • VESA 300 x 100
    • VESA 300 x 200
    • VESA 300 x 300
    • VESA 300 x 400
    • VESA 400 x 100
    • VESA 400 x 200
    • VESA 400 x 300
    • VESA 400 x 400
    • VESA 400 x 600
    • VESA 500 x 100
    • VESA 500 x 200
    • VESA 500 x 300
    • VESA 600 x 100
    • VESA 600 x 200
    • VESA 600 x 300
    • VESA 600 x 400
    • VESA 700 x 200
    • VESA 700 x 300
    • VESA 700 x 400

    Tools You Will Need For Installation

    • 3/16" Drill Bit
    • 3/8" Masonry Bit (Concrete Installations)
    • Awl
    • Electric Drill
    • Hammer
    • Level
    • Pencil
    • Phillips Head Screwdriver
    • Stud Finder
    • Tape Measure
    Rated 3 out of 5 by from Bring your own lag bolts So I purchased this to hang a new 43” TV I upgraded in my bedroom since I have an upcoming surgery and will be living in there for 3 or 4 days. Watched the videos, read the instructions, predrilled into studs into the wall. EVERY bolt except for one that came with the unit stripped halfway into screwing them in. Fortunately I had some better quality ones in my garage that I could use to finish the installation. TV is safe and sound hanging on my wall and waiting for my recovery, but pretty disappointed with the quality of the ones that came with it. I would recommend this but buyer beware of the hardware.
    Date published: 2019-08-18
    Rated 3 out of 5 by from Bought 4 of these Glad to know it wasn’t just me having issues with the hardware bolt for this mount. Everyone stripped, but we had no other choice but to get them up. Once up the mount is great, its close and snug to wall and looks great, but such poor quality bolts and hardware to get them up
    Date published: 2019-06-23
    Rated 1 out of 5 by from Terrible hardware!! I agree with many many of the reviewers here. The included hardware (specifically the drywall/stud screws are poorly designed. You will screw through the bolt leaving NO OTHER option to remove or tighten the screw since it is rounded and not hex. You can try your luck with a socket wrench (like I did) and I managed to get it but with great difficulty. It shouldn't be this kind of torture. I was one step away from calling Geek Squad and give up the whole thing. Also, I couldn't find an in between 45mm and 50mm M8 as that is what would be perfect for the curved back tv to be 90 degrees vertical with
    Date published: 2019-06-17
    Rated 2 out of 5 by from Lousy wall mounting hardware The device itself is easy to use and, at least the unit I received, works as advertised. Full disclosure, I bought two of these, and returned the unopened one shortly after trying to install the first. Like most of the reviews here, the hardware in my unit for mounting the wall plate was junk. The mounting screws stripped halfway into the wall. I had to run to Lowe's to purchase a stripped screw removing bit and some decent wood screws to replace them. Because I had to buy the stripped screw remover and new screws, the effective price of this until was $35 more than what I paid at Best Buy...not a good deal for a static wall mount. If you want to buy this unit, just go ahead and buy some better wood screws of an appropriate size before enduring the headaches that trying to use the packaged equipment will cause. I'm happy with the final result, but not the headaches and additional cost I endured due to cheap hardware. I effectively paid for a great full motion system but only got a static mount. On the plus side, Sanus has some great online resources for helping you determine the right height for mounting, and the directions are pretty easy to follow and implement. If they didn't cheap out on the wall mounting hardware, this would be a more positive review.
    Date published: 2019-03-31
    Rated 3 out of 5 by from Great mount spoiled by hardware Like many others I found that this mount was well designed and easy to plan but as soon as I tried to install the lag screws every one of them stripped the Torq from the screw and I couldn't screw them in or get them out without using a pipe wrench. The screws are simply really poor quality while the rest of the mount is good
    Date published: 2019-03-22
    Rated 1 out of 5 by from Very poor mounting hardware Screw stripped very easy while putting this up. I was unable to finish the mount with the supplied hardware!
    Date published: 2019-03-11
    Rated 1 out of 5 by from Poor mounting hardware I bought this bracket today along with on that tilts. The one that tilts comes with a lag bolt. The fixed bracket comes with a cheap lag screw and bit. Why sauna would go away from the lag bolt is beyond me. 3 of the 4 lag screws are stripped and I know have to find a way to get the remove from being half way in my wall. Thanks but no thanks!
    Date published: 2019-02-12
    Rated 1 out of 5 by from Poor quality mounting hardware As a building professional I decided to to install this simple wall mount tv bracket in my own home. As part of my remodel we are installing a wall mount tv over a custom entertainment credenza with floating shelves over a grass cloth wallpaper. So not to damage the wallpaper once it’s installed I decided to install the wall mount bracket and tv to verify placement and then remove the bracket and have the wallpaper installed. The instructions for the bracket along with the height finder software on the sanus website were great. I located the wood studs, predrilled the mounting holes using the recommended 3/16 drill bit, installed the top two lag bolts and hung the tv to verify placement. All was perfect. I attempted to remove the tv and found only one of the pull strings would release. It took me 10 to 15 minutes of pulling on the cord before it would release the tv. Once I was able to release the tv I attempted to remove the bracket. Using the drill bit provided I reversed the drill and attempted to back the screw out. As I was backing the screw out the tip of the bit stripped and became round (see attached photo) and would no longer work. In addition this damages the head of the lag. I drove to two hardware stores in order to purchase a new bit. I was able to loosen the lags enough so I could use a vice grips to completely remove the lags. Horrible experience. I plan on returning this bracket and choosing another option.
    Date published: 2019-01-20
    • y_2019, m_10, d_15, h_7
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_11
    • loc_en_US, sid_bll2, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_sanus
    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getReviews, 94.16ms
    comments powered by Disqus