SANUS VLF410 Full-Motion Wall Mounts
Super Slim Full-Motion Mount for 37" – 84" flat-panel TVs — Best Buy Exclusive
- Type Full-Motion
- Fits TVs 37" - 84"
- Max Weight 125lbs
- Swivel 30° / -30°
- Extension 10.17"
VLF410 Discontinued
$319.99 USD
Super Slim Full-Motion Mount for 37" – 84" flat-panel TVs — Best Buy Exclusive
- Type Full-Motion
- Fits TVs 37" - 84"
- Max Weight 125lbs
- Swivel 30° / -30°
- Extension 10.17"
VLF410 Discontinued
$319.99 USD
This product has been discontinued.
VLF410 is rated
out of
5 by
2.
The SANUS VLF410 Super Slim full-motion mount places 37" – 84" TVs just 1.54" / 3.91 cm from the wall, yet still allows full-motion capabilities. With its cable management guide, the VLF410 keeps loose cables organized, creating a clean appearance without compromising TV movement. A cutting-edge gliding system makes ideal TV positioning effortless—TV can easily extend away from the wall and shift left or right on the wall plate. The VLF410 always has a finished appearance with a decorative cover that conceals assembly and mounting hardware. This product is only sold at Best Buy and on sanus.com.
Will this work with my TV?
Enter the model number of your TV to find out.
Here are a few products that are compatible with your TV!
Product Features
Take A Look At These Specs
| Product Brand: | SANUS |
| Model Code: | VLF410 |
| UPC Code: | 793795525420 - Black - Discontinued |
| Product Width: | 32.16" / 81.69cm |
| Product Height: | 20.34" / 51.66cm |
| Product Depth: | 1.54" - 10.17" / 3.91cm - 25.83cm |
| Product Weight: | 31.80lbs / 14.42kg |
| Package Width: | 35.20" / 89.41cm |
| Package Height: | 2.60" / 6.60cm |
| Package Depth: | 22.00" / 55.88cm |
| Package Weight: | 36.10lbs / 16.37kg |
| TV Size Range: | 37" - 84" / 93.98cm - 213.36cm |
| Maximum TV Weight: | 125lbs / 56.70kg |
| Universal Mounting: | Yes | 146 x 25 through 730 x 420 i |
| Supported VESA Patterns | |
| Tilt: | 0° / -10° |
| Roll: | 2° / -2° |
| Swivel: | 30° / -30° |
Supported VESA Patterns
- VESA 200 x 100
- VESA 200 x 200
- VESA 200 x 300
- VESA 200 x 400
- VESA 300 x 100
- VESA 300 x 200
- VESA 300 x 300
- VESA 300 x 400
- VESA 400 x 100
- VESA 400 x 200
- VESA 400 x 300
- VESA 400 x 400
- VESA 500 x 100
- VESA 500 x 200
- VESA 500 x 300
- VESA 500 x 400
- VESA 600 x 100
- VESA 600 x 200
- VESA 600 x 300
- VESA 600 x 400
- VESA 700 x 200
- VESA 700 x 300
- VESA 700 x 400
Videos to Get You Started
What is Full-Motion?
SANUS VLF410 Features Video
SANUS VLF410 Installation Video
Tools You Will Need For Installation
-
7/32" Drill Bit
-
3/8" Masonry Bit (Concrete Installations)
-
1/2" Socket Wrench
-
Awl
-
Electric Drill
-
Hammer
-
Level
-
Pencil
-
Phillips Head Screwdriver
-
Stud Finder
-
Tape Measure
Rated 3 out of
5
by
oldsmokey from
It's ok but
I have an older Panasonic 42" plasma and it has some non-standard mounting holes. This mount does fit the TV but the middle support bar in the rear of the mount, when the TV is centered on the mount, completely obscures the input block on the rear of the TV including the hdmi port. I have not plugged any cables in yet, perhaps you can slide the TV to one side of the mount or the other, plug in the cables and then center the TV on the mount. It's the way I will have to do it anyway so it's going to have to work. Which brings me to the second issue; the leveling adjustment screw. The instructions say you can level the TV by loosening and then tightening a screw in the center of the mount plate. The screw is there but when completely tightened, it holds no friction on the TV which means it's still not level nor will that adjustment be able to hold. Finally, pushing the TV back towards the wall or pulling it forward away from the wall, both those motions take a lot of force. The mount is rated for 125 pounds; my TV weighs 76 so I have just over half the weight it's rated to carry and it's just not very smooth. I was able to adjust my tilt up and down to hold in one place, so that one is not an issue but overall, having spent this amount of money I expected the product to be a little more polished then it was.
Date published: 2015-10-17
Rated 3 out of
5
by
onetwright from
under delivers
I bought this for a 65" Sony 4k. While it is full motion, getting the TV to move in and out from the wall is not easy. I think the weight of my TV is sufficient to cause enough friction in the rulers that it requires quite a bit of force to move in and out. At the same time, the lateral tilt/ level barely needs any force to move. So, the angle I want rock solid is loose, and the motion I want easy is difficult. If it wasn't such a pain to redo it, I'd return the mount for an arm type.
Date published: 2015-09-12
