3U High Volume Fan SANUS EcoSystem™ accessory
SANUS Component Series CAFH01 3U high volume fan easily connects to the CAPT01 MultiVolt Power Supply to help create the SANUS EcoSystem™ - a fully customizable accessory that serves as the single power source for all low-voltage equipment in an AV rack. This component is automatically activated by the thermostat kit (included with the MultiVolt Power Supply) when the rack exceeds 85 degrees and turns off when the rack goes below 75 degrees, plus Power Wire.
- Hardware included
Take A Look At These Specs
|UPC Code:|| 793795524171 - Black - $109.99 USD
|Product Width:||19.00" / 48.26cm|
|Package Width:||20.08" / 51.00cm|
|Package Height:||2.17" / 5.51cm|
|Package Depth:||1.42" / 3.61cm|
|Noise Rating:||45.00 dBA|
|Air Volume Movement:||156 SCFM|
Supported VESA Patterns
VESA patterns are measured by the center of one mounting hole to the center of another on the back of a television in millimeters. In the example above, the VESA measurements are 100 (width) x 100 (height). The example TV would be able to use a VESA 100 x 100 mount.
The sample was placed in a hemi-anechoic sound chamber 1.2 meters above the floor on an isolated mounting system. The sound pressure level was measured at 1 meter from the discharge of each test sample using a Bruel and Kjaer 2270 sound level meter. Temperature at time of testing: 68 - 70°F Dry Bulb, 51 - 56°F Wet Bulb. Barometric Pressure at time of testing: 28.65 - 28.86 in. Hg. Sound Pressure level, in A-weighted decibels, is referenced to the auditory threshold of p0= 20 µPa.
Air Volume Movement
The fans were tested in accordance with ANSI/AMCA 210-99, ANSI/ASHRAE 51-1999, entitled: "Laboratory Methods of Testing Fans for Rating". The metering station, through appropriate ductwork, was connected to the discharge of a variable air supply/exhaust system. To determine the air volume, the static pressure difference was measured employing piezometer rings and a "Dwyer" inclined manometer Model No. 424-5. Temperature at time of testing: 68 - 70°F Dry Bulb, 51 - 56°F Wet Bulb. Barometric Pressure at time of testing: 28.65 - 28.86 in. Hg.
Tools You Will Need For Installation
Phillips Head Screwdriver